How do I cook a 2 inch thick porterhouse steak?

Contents show

How do you grill a 2 inch thick porterhouse steak?

Prepare a grill for medium-high heat. Grill the steaks until the internal temperature registers 125 degrees F on an instant-read thermometer for medium rare, 8 to 10 minutes per side. Remove the steaks from the grill, top each with 1 to 2 tablespoons of the Herb Butter and let rest for 5 to 10 minutes.

How should porterhouse steak be cooked?

Preheat oven to 250 degrees. Brush porterhouse steaks with olive oil, and sprinkle with a little salt and pepper on both sides. Transfer to a cast-iron skillet with a drizzle of olive oil. Cook for about 20-30 minutes, or until the internal temperature reads 120 degrees.

How do I cook a 2 inch thick steak?

To cook a 2-inch-thick steak, use direct heat. When grill is medium (you can hold your hand at grill level only 4 to 5 seconds), follow directions below; cook steak 20 to 25 minutes for rare, 27 to 30 for medium. To cook a 3-inch-thick steak, use indirect heat.

What is the best thickness for a porterhouse steak?

When buying a porterhouse steak, look for one cut at least 1.5 inches thick. Occasionally, butchers will sell “thin” cut steaks, but these are largely pointless. A porterhouse should be thick, and not just because it is a huge steak and deserves to be so.

How long do you cook a porterhouse steak on a gas grill?

Cooking Porterhouse Steak on the Grill (medium-rare doneness recommended): For the perfect medium-rare degree of doneness, grill your Porterhouse steak for 10–13 minutes for a 1-inch steak, and 14–17 minutes for a 1½ inch steak, turning about 1 minute before the halfway point. A meat thermometer should read 130°F.

What temperature do you bake porterhouse?

Medium-rare is the most common doneness level for porterhouse steak. To cook it yourself, first sear the steak in a cast-iron skillet, allowing each side to crisp up in about 3-5 minutes. Then, transfer the steak to a rimmed baking sheet to cook in the oven for 10-20 minutes at 350 degrees.

How long do you cook 2 inch steaks?

SIRLOIN STRIP STEAKS, RIBEYE STEAKS & PORTERHOUSE STEAKS

Thickness Rare 110 to 120 F Medium Rare 120 to 130 F
1.25″ 4.5 minutes EACH SIDE 5.5 minutes EACH SIDE
1.5″ 5 minutes EACH SIDE 6 minutes EACH SIDE
1.75″ 5.5 minutes EACH SIDE 6.5 minutes EACH SIDE
2″ 6 minutes EACH SIDE 7 minutes EACH SIDE

How do you cook a 2 inch steak on the stove?

Melt 2 tablespoons butter into hot pan and immediately place steaks in to sear. Cook the meat 3-4 minutes on the first side without touching it or moving it around. Flip your steaks over, top each steak with 1/2 tablespoon of butter and transfer to the hot oven for 5 minutes, keeping them in the same skillet.

IT IS INTERESTING:  Can I cook Chinese food in a cast iron skillet?

Should you marinate porterhouse steak?

Beef purest will tell you there is absolutely no need to marinade a high-quality steak like a porterhouse. And really, they wouldn’t be wrong. Without a marinade, you allow that beefy flavor to shine and it’s perfectly satisfying and delicious without any extras.

What temperature should I cook steak on the grill?

Brush your cooking grates clean and adjust your grill for direct, high heat. The best temperature for steaks is 450°F to 500°F. 4. Put your steaks on the grill, close the lid, and set your timer for 2 to 3 minutes, depending on the thickness of your steak.

Is 2 inch steak thick?

Some steak masters suggest even thicker cuts, such as those that are 1.75 inches or 2 inches thick. But for most, a 1.5 inch steak is the perfect size for at-home grilling, broiling, or pan-searing.

How do you tenderize a porterhouse steak?

How to Tenderize Porterhouse Steak

  1. Squish it. Put the meat between wax paper or plastic wrap and use a tenderizing mallet, the bottom of a pan or any other blunt object to soften the steak.
  2. Cut it. Score the meat with a sharp knife before cooking.
  3. Salt it.
  4. Marinate it.

Which is better T-bone or porterhouse?

Porterhouse steaks, which contain more filet than T-bone steaks, are generally better for two. A porterhouse steak should be at least 1.25 inches thick since it is derived from the back of the short loin, where tenderloin is abundant.

How long should I cook my porterhouse steak in the oven?

Preheat oven to 450 F. Season steak with salt and pepper. In an ovenproof (preferably cast-iron) skillet, sear steak over high heat for 2 minutes a side. Pop into the oven and roast for 12 to 20 minutes, turning once depending on how rare you want it and how thick it is.

Are porterhouse steaks good?

As for its flavor profile, porterhouse is considered one of the highest-quality cuts available, which means it requires little in the way of adornments to deliver a delicious meal.

What should I season my bone steak with?

Salt and pepper are musts when it comes to seasoning your steak. For optimal flavor, be sure to use coarse-grained Kosher salt (not regular table salt) and freshly ground black pepper. You really don’t need to use other seasonings. The simple salt and pepper combo will allow the steak’s natural flavor to come through.

What oil should I use to cook a steak?

When cooking steak in cast iron skillets, you want to use a type of oil that has a high smoke point. For example, peanut oil, canola oil, grapeseed oil, and avocado oil are ideal options for cooking steak due to their high smoke points.

Can you fry porterhouse steak?

Heat up a cast Iron Skillet with about 1 teaspoon of Canola Oil in it over a medium high heat. Generously season both sides of your porterhouse with salt. Once the oil and pan is hot, place your porterhouse in the pan and let cook 4 minutes on one side (don’t touch it just let it cook).

How many minutes do you cook a steak?

Place the steaks on the grill and cook until golden brown and slightly charred, 4 to 5 minutes. Turn the steaks over and continue to grill 3 to 5 minutes for medium-rare (an internal temperature of 135 degrees F), 5 to 7 minutes for medium (140 degrees F) or 8 to 10 minutes for medium-well (150 degrees F).

What’s the difference between a ribeye and a porterhouse?

The main differences between the porterhouse and ribeye comes down to fat and bone content. The porterhouse contains a “T” shaped bone, while the ribeye can come in bone-in or boneless varieties. Ribeye steaks have a distinctive “meaty” flavor given the high fat content.

Why do you put butter on steak?

Why do people put butter on steak? Adding butter to steak adds extra richness and can also soften the charred exterior, making a steak more tender. But a good Steak Butter should complement the flavor of a steak, not mask it.

What temperature do you cook a thick steak?

Steaks with 3/4 Inch Thickness

The ideal temperature to cook steaks of 3/4 inch thickness is around 360°F to 400°F based on the type of meat. For charcoal grills, medium-hot coals are fine with a light layer of ash.

How long do you cook 2 inch steaks on the grill?

Gas Grills

  1. Preheat on high. Sear both sides for 1-2 minutes.
  2. Reduce to medium heat and continue to grill. Reference the cooking chart for times.
  3. For the perfect medium-rare 2 inch thick steak, grill for 18-20 minutes, turning about 1 minute before the halfway point. A meat thermometer should read 130°F.
IT IS INTERESTING:  Can you cook frozen chicken nuggets in a toaster oven?

How do you grill a 2 inch steak medium-rare?

2-inch steaks are quite thick but on the other hand not thick enough for too much cooking. With that in mind, the best way to cook a 2′ thick steak is by grilling it to medium-rare. Medium rare temperature ranges between 120 and 140 degrees Fahrenheit.

Do you flip a steak in the oven?

When your oven comes to temperature, use an oven mitt to carefully remove the skillet, add your steaks, put the skillet back in the oven and cook until it’s deeply seared on one side. Then, flip the steaks using a pair of tongs and cook for a few more minutes, depending on how you like it cooked.

Do I cover steak when frying?

Turn the heat to low-medium before placing the steak in the pan. Cover the pan with a lid and cook for 4-6 minutes, or until the inside reaches your desired temperature with a meat thermometer.

How long do you pan fry steak on each side?

If the correct thickness, cook 3-4 minutes on each side to reach an internal temperature of 125 degrees (or desired doneness). Half way through, add smashed garlic cloves. Remove from heat and place butter in the pan. Allow it to melt and spoon over steaks.

Can you use olive oil to pan fry steak?

Put the pan over high heat, and leave it until it is extremely hot. Add 1T butter and 2T olive or canola oil to the pan and watch for the butter starting to brown. Place the steak into the pan and reduce the heat to medium, cooking the first side for 4-6 minutes.

How do I cook a 2 inch thick ribeye steak?

For the perfect medium-rare Extra-Thick Cut Bone-In Ribeye in the oven (recommended), broil for 19–21 minutes for a 2-inch steak, turning about 1 minute before the halfway point. A meat thermometer should read 130°F. Rest your steaks for 5 minutes before serving, covering lightly with foil.

What is the best steak to cook on the stove?

The best steaks for cooking on the stovetop are boneless steaks that are between one and one-and-a-half inches thick. Thicker cuts like a New York strip steak or a boneless rib-eye work best for this method.

How long do you pan fry steak?

Cook without moving steaks until a golden brown crust forms, 3 to 4 minutes. Turn and cook 2 minutes more for rare, or 3 to 4 minutes more for medium-rare. Transfer to a cutting board and let rest 5 minutes. Slice steaks against the grain; serve with sauce, if desired.

What does soy sauce do to beef?

Essentially, soy sauce will help your meat taste meatier. Because protein already has a considerable amount of umami flavor, adding soy sauce can make it a savory sensation. Soy sauce can also help your piece of protein take on an appetizing burnished, caramelized color. Adding soy sauce to your meat is easy, too.

Should you tenderize steak before marinating?

When you tenderize a cut of meat, you puncture holes in the connective tissue, allowing the meat to absorb the seasonings and marinades better, making the cooked steak more succulent and easier to consume. Tenderizing also helps with the preparation of thick cuts of steak.

Should you marinate steak before grilling?

Should you marinate steak? No rule says you have to marinate steaks before grilling. However, it adds flavor and helps to tenderize the meat if you can marinate them before grilling.

Should you cook steak on low or high heat?

Get the Grill Smoking Hot

Obviously, you don’t want to burn your food or start a fire, but when you’re grilling a steak, it’s really important to use the highest heat you can generate. This is because high heat cooks faster and the less time your steak spends cooking, the more tender it will be.

How long do you grill a steak at 350 degrees?

Grill, covered with grill lid, over medium heat (300° to 350°) 2 1/2 minutes. Using tongs, turn each steak at a 60-degree angle, and grill 2 1/2 more minutes. Flip steaks, and grill 2 1/2 minutes. Turn steaks at a 60-degree angle, and grill 2 1/2 more minutes (medium-rare) or to desired degree of doneness.

How do you tell if a steak is done without a thermometer?

Your ring finger represents a medium steak, and touching your thumb to your pinky—which you’ll notice produces a very taut result—is a well-done steak. To get a perfect steak, simply poke it while it cooks, until the firmness of the meat matches the firmness of various parts of your hand.

What is the best steak thickness?

The Sweet Spot: 1.5 Inches

The best steaks, especially premium cuts like ribeyes, are around 1.5 inches (3.8cm) in thickness. With a 1.5-inch thick steak, the steak’s centre is better insulated compared to thinner steaks, allowing you to be much more precise when it comes to doneness.

IT IS INTERESTING:  What is the difference between lasagna and baked ziti?

Why is it hard to cook thick steak?

The Crust of the Matter

A cold, thick steak added to a hot pan can take upward of 4 minutes per side to form a good crust— during which time the meat beneath the surface is overcooking.

What is the largest cut of steak?

Tomahawk steak

The cut is a bone-in ribeye steak from the front rib of the beef. The thickness of the cut depends on the thickness of the bone. A tomahawk steak is normally so big that it can easily feed at least two people.

Which cooking method is best for porterhouse steak?

Since the porterhouse is usually a thick cut, the best way to cook it is pan-searing at high temperature before finishing in the oven. This “stove to oven” method helps to lock in the moisture for juicy steak. Other options include grilling or broiling.

Why is my porterhouse tough?

Steaks should be cooked at a high temperature for a short time. This allows the fat to melt and be evenly distributed through the meat, so it is juicy and tender. Cooking the steak too long will cause the fat to evaporate and make it tough and chewy.

How should porterhouse steak be cooked?

Preheat oven to 250 degrees. Brush porterhouse steaks with olive oil, and sprinkle with a little salt and pepper on both sides. Transfer to a cast-iron skillet with a drizzle of olive oil. Cook for about 20-30 minutes, or until the internal temperature reads 120 degrees.

How thick should a porterhouse steak be?

USDA guidelines outlines a porterhouse must be at least 1.25 inches thick measured from the tenderloin, and a T-bone is 0.5 inches thick. The bone, fat and muscle make the Porterhouse a very tender and flavorful cut of meat.

What 2 steaks are in a porterhouse?

The porterhouse is a composite steak that’s derived from the point where the tenderloin and top loin meet. If you remove the bone and cut out the two steaks that make up the porterhouse, you get a tenderloin steak and a top loin (or New York strip steak). So if you order a porterhouse, expect big portions!

Is a porterhouse a filet mignon?

The Porterhouse is a bigger loin cut (serving 2-3) and includes both a filet mignon and a strip steak. A little edgier than the loin cuts, the Porterhouse can actually be less expensive to buy than a portioned filet and offers a more striking presentation than a portioned strip steak.

Can you bake porterhouse steaks in the oven?

Oven-Cooked Porterhouse Cooking Time

Generally, porterhouse steak takes 3-5 minutes on each side to sear in a pan. Once in the oven, you’ll need another 10-20 minutes for it to reach medium-rare. An oven-cooked porterhouse should be ready in 60-90 minutes with preparation and resting time.

What temp should porterhouse steak be?

You’ll want to remember that when calculating your ideal pull temp (read here for more on steak temps). A beautiful porterhouse like this really is best cooked to medium rare, 130–134°F (55–57°C) final temperature, but you can cook it more to medium (135-145°F [57-63°C]) according to your individual taste.

Why is porterhouse steak expensive?

Porterhouse steak is expensive because it requires a large portion of the cow to be dedicated to a single steak, thus you typically only have one porterhouse steak per animal.

How long do you grill a porterhouse steak?

Cook It

  1. Rare: 45 minutes (1-inch steak) and 1–2½ hours (1½ inch steak)
  2. Medium-Rare: 45 minutes (1-inch steak) and 1–4 hours (1½ inch steak)
  3. Medium: 45 minutes (1-inch steak) and 1–2½ hours (1½ inch steak)
  4. Medium-Well: 45 minutes (1-inch steak) and 1–3½ hours (1½ inch steak)

Which is better porterhouse or New York strip?

Marbling and Taste

Because of their size, though, porterhouse steaks tend to have a deeper, richer flavor than New York strips. Both steaks are known for their tenderness.

Is T-bone or porterhouse steak better?

Porterhouse steaks, which contain more filet than T-bone steaks, are generally better for two. A porterhouse steak should be at least 1.25 inches thick since it is derived from the back of the short loin, where tenderloin is abundant.

Is T-bone the same as porterhouse?

If you remember nothing else about these two cuts of steak, remember this: The porterhouse is a bigger version of the T-Bone. The T-Bone is one of the most easily-identifiable steaks. It has a T-shaped bone running through it, making it easy to spot in our meat case.

How long should at bone steak cook in the oven?

Rest it and enjoy. How long does it take T bone steak to cook in the oven? Not long! If you like your meat medium-rare, your T-bone steak should be ready in just about ~15-17 minutes.