When cooking turkey parts, oil temperature should be 325° F; may take 4 to 5 minutes per pound to reach the recommended temperatures (dark meat to an internal temperature of 175° F to 180° F, and white meat to an internal temperature of 165° F to 170° F). You’ll need 2.5-3 gallons of oil.
How much oil do I need to fry a 20lb turkey?
20 Pound Turkey * – Use 5 to 6 gallons of oil and cook for 3 minutes per pound.
How much oil does it take to fill a turkey fryer?
Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.
How long do you deep fry a 19 pound turkey?
To be certain that the turkey is thoroughly cooked, confirm that its internal temperature is between 180-190°F.
How Long Does it Take to Deep Fry a Turkey?
| Weight | Time to Cook |
|---|---|
| 17 Lbs. | 59.5 minutes |
| 18 Lbs. | 63 minutes |
| 19 Lbs. | 66.5 minutes |
| 20 Lbs. | 70 minutes |
Can you fry a 20 pound turkey in a 30 quart?
Use same amount of oil in the place of water when frying the turkey.) A 24 quart pot will hold up to a 14 lb. turkey, a 26 quart pot will hold up to a 16 lb. turkey, and a 30 quart pot will hold up to a 20 lb.
How much oil do I need for an 18 pound turkey?
Luckily, we’ve got the answer! For small turkeys around 9 pounds, use 3-4 gallons of oil. For medium size turkeys around 12-14 pounds, use 4-5 gallons of oil. For larger turkeys up to 22 pounds, use 5-6 gallons of oil.
How much oil do you put in a deep fryer?
Most electric deep-fryers use between 6 and 19 cups of oil; our winner uses slightly under 15 cups. This is more than enough oil for most of our recipes; when deep-frying in a Dutch oven, we typically use 8 to 12 cups. You can use either peanut or vegetable oil; we have no distinct preference in the test kitchen.
What is the best oil for turkey frying?
Peanut oil is the best option for deep frying turkey. Its high smoke point makes it the ideal choice for frying a turkey. This oil can be reused as many times as you want. In addition, it has a neutral taste and can be purchased in bulk.
Can you use vegetable oil to fry a turkey?
Deep-frying makes the turkey crispy on the outside and super juicy on the inside (even the white meat). It also leaves the heat outside! You can deep-fry the turkey in either peanut or vegetable oil, your choice.
Do you fry a turkey at 325 or 350?
Heat oil in pot (allow enough room in pot for turkey to be placed, too much oil will cause overflow), bring oil to at least 375 degrees F. Placement of turkey will bring temperature down and you will want to keep temperature at 325 degrees F. while cooking.
When should you inject a turkey before frying?
Traditionally, a fried turkey is injected with a marinade before it’s cooked; how long before cooking is a subject of debate. You can inject the turkey anywhere from 24 hours to 5 minutes before frying. We had good results injecting two hours before frying.
Do you put the lid on when deep frying a turkey?
Keep an eye on the bird for the duration of the frying time, and make sure the temperature is at 350 during cooking. Leave it uncovered. You should fry your turkey for 3-4 minutes per pound.
How big of a turkey can I fry in a 30 qt fryer?
We’ve researched to answer this question so you can save time in and out of the kitchen. A 30-quart fryer can hold turkeys that are up to 20 pounds.
How many times can peanut oil be reused?
When stored properly, peanut oil can be reused up to 3-5 times before it needs to be disposed. Used oil has a much shorter shelf life than fresh oil, so you should use the same batch of oil within only a few months to avoid risks of rancidity.
Can you reuse peanut oil after a year?
Peanut oil, like other vegetable oils, has a “best by” or “use by” date on the label. That date indicates how long should the oil remain at the best quality. Of course, it doesn’t go bad or rancid overnight after that date. You can store it easily for months, or even a couple of years, past that date.
Can I reuse peanut oil after frying a turkey?
Don’t let that deter you because you can reuse oil for frying. Under normal conditions, oil can be heated for up to six hours. A deep-fried turkey can cook in under an hour (three minutes per pound) so you can fry six items on six different occasions with a single batch of oil.
Can you deep fry a 20 lb turkey?
How Long Do You Deep Fry a 20 lb. Turkey? Since turkeys should be deep fried for 3 1/2 – 4 minutes per pound, a 20 lb. turkey will take 1 hour and 10-20 minutes.
Can I use canola oil to fry a turkey?
Canola oil is recommended because of its high smoke point and low allergy concerns. The ideal frying temperature is 375°F. Once you submerge the turkey, the oil temperature will drop.
What is the best oil to use in a deep fryer?
Vegetable oil is the best oil for deep frying. Canola oil and peanut oil are other popular options. While vegetable oil, canola oil, and peanut oil are the most popular oils for deep frying, there are several other oil options you can choose: Grapeseed Oil.
What is the best type of oil to use for deep-frying?
And because it is neutral in flavor, it won’t impart any additional flavors to your food. Which means that by any measure, whether it’s smoke point, health or cost, canola oil is the best oil for deep-frying.
How do you know when oil is ready for deep-frying?
Place the handle of a wooden spoon in the oil. The oil is ready when bubbles begin to appear around the tip of the handle.
Can you reuse vegetable oil after frying?
Yes, it is OK to reuse fry oil. Here’s how to clean and store it: ① Once you’ve finished frying, let the oil cool. When it’s reached a safe temperature, use a utensil to remove any large pieces of batter that might be left over.
Can you use vegetable oil to deep-fry?
There’s no one oil that’s best for deep-frying, although vegetable, canola, sunflower and rice bran oil are all good, as they can be heated to high temperatures without burning.
How much oil do I need to fry a 21 pound turkey?
When cooking turkey parts, oil temperature should be 325° F; may take 4 to 5 minutes per pound to reach the recommended temperatures (dark meat to an internal temperature of 175° F to 180° F, and white meat to an internal temperature of 165° F to 170° F). You’ll need 2.5-3 gallons of oil.
How do you deep-fry a turkey without peanut oil?
Tip: Peanut oil is the most popular type of oil used for deep frying a turkey, but any oil with a smoking point of 450 degrees Fahrenheit will work. Try safflower oil or corn oil if you don’t like peanut oil or are accommodating a peanut allergy.
How long does it take to fry a turkey in vegetable oil?
Once the oil temperature climbs back up to 350 degrees F, start timing: Fry the turkey until a thermometer inserted into the thickest part of the thigh registers 180 degrees F, about 3 1/2 minutes per pound. (A 12-pound bird will take about 50 minutes from the time you lower it into the oil.)
Do you have to fry turkey in peanut oil?
Roasting a turkey can take hours, so if you want a quicker option, you can deep-fry the turkey in oil instead. While peanut oil is the oil that is traditionally used, you can deep-fry the turkey in any oil that has a high smoke point.
Should turkey be room temp before frying?
Step 5: It’s Time to Fry!
Remove the turkey from the refrigerator, place it in a clean aluminum pan and let it sit at room temperature for 30 to 60 minutes. This will help the turkey cook faster and more evenly.
Why did my deep fried turkey turn black?
The general consensus around the fryer was that the blackness was caused by the sugar in the rub.
What is the best size turkey for frying?
When frying a turkey, purchase a smaller size turkey, 12- to 14-pound average. Most turkey fryers are made to cook these smaller turkeys.
How do you get crispy skin on fried turkey?
I suggest you break down a turkey into its pieces, using the thighs, breasts and legs. Brine the pieces, then dry them out in the refrigerator to ensure extra crispy skin, before simply dipping the turkey in buttermilk and seasoned flour. I guarantee that using this method will give you perfect results every time.
Is it better to brine or inject a turkey?
Advantages of injecting turkey:
Injecting works faster than brining. You can inject the bird immediately before cooking. Fats like melted butter, duck fat, or olive oil can be delivered deep into the breast meat, increasing its succulence.
Does injecting a turkey make it juicier?
Flavor injecting turkey not only adds flavor to the meat but also results in a moist and juicy bird. The flavoring is injected into the meat of the turkey as opposed to rubs that only season the skin. Injecting a turkey with a flavored liquid is a good technique for producing moist, flavorful meat.
Do you Tie turkey legs together when frying?
You don’t need to truss the entire bird when deep-frying, but you will want to tuck the wings behind the turkey and tie the legs together to promote even cooking.
How long does it take to heat 3 gallons of peanut oil to 350 degrees?
Approximately 30 minutes. Be sure the lid is on the fryer to help speed up the process. Use good quality oil with a smoke point of 400°f or higher. Vegetable, corn, canola, soybean, or peanut oils are safe to use.
Is deep-frying a turkey worth it?
Deep-frying a turkey is a vastly superior option for countless reasons. The most important: Like everyone who’s ever tried it will tell you, it tastes better than roast turkey. The white meat is moister, the dark meat is even more flavorful, and the skin, while not always totally crispy, is never slimy and gross.
What size turkey will a 36 quart fryer hold?
Made of a heavy-gauge aluminum, the heavy-duty aluminum pot and frying basket offer enough room to safely cook a turkey up to 22 lbs.
What do you do with the oil after frying a turkey?
1) Allow the oil to cool down post-meal. 2) Then, pour it into an unbreakable, sealable container. 3) Seal the lid tightly and throw it away with the rest of your trash. 4) A post-cooking oil disposal dance is optional.
How do you store peanut oil after you use it?
Opened or not, store peanut oil in a cool, dark place. If opened, storing in the refrigerator will help to extend its shelf life by a few months. It will thicken up in the refrigerator, but will return to its liquid state at room temperature. If the oil has gone bad, you will be able to tell by its rancid smell.
How do you dispose of deep fryer oil?
Mix the oil with sand, sawdust, cat litter, or some other absorbent material and then discard it. If you deep fry on a regular basis, consider investing in a Fat Trapper system. this plastic receptacle holds foil-lined bags where you can pour used oil, seal it when it’s full, and dispose it in the garbage.
How do you store oil after frying?
Store the oil in a cool, dark place like in your pantry. Do not store it near the stove or in the light. Heat and light will accelerate the oxidation of the oil. Use the oil quickly.
What can I do with leftover frying oil?
Remember, once your oil is caput, don’t pour it down the drain. That’s bad for your pipes and bad for the environment. Do place it back in that resealable container and throw it away. For bonus points (and good oil karma) use this handy site to find out where you can recycle cooking oil in your area.
What cooking oil has the longest shelf life?
Olive Oil. This is probably your favorite for cooking, salad dressings, and herbal remedy preparations. It can also be used for emergency lighting and candles. Olive oil can be stored longer than most other oils and as long as it’s stored properly it will last the longest of these 5 oils – about 24 months.
How much oil do I need to fry a 20 pound turkey?
20 Pound Turkey * – Use 5 to 6 gallons of oil and cook for 3 minutes per pound. 22 Pound Turkey * – Use 5 to 6 gallons of oil and cook for 3 minutes per pound.
What’s the best oil to fry turkey in?
Peanut oil is the best option for deep frying turkey. Its high smoke point makes it the ideal choice for frying a turkey. This oil can be reused as many times as you want.
How much oil do I need to deep-fry a turkey?
Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.
How long do you deep fry a 19 pound turkey?
To be certain that the turkey is thoroughly cooked, confirm that its internal temperature is between 180-190°F.
How Long Does it Take to Deep Fry a Turkey?
| Weight | Time to Cook |
|---|---|
| 17 Lbs. | 59.5 minutes |
| 18 Lbs. | 63 minutes |
| 19 Lbs. | 66.5 minutes |
| 20 Lbs. | 70 minutes |
Can you use vegetable oil to fry a turkey?
Deep-frying makes the turkey crispy on the outside and super juicy on the inside (even the white meat). It also leaves the heat outside! You can deep-fry the turkey in either peanut or vegetable oil, your choice.
How do you fry a 20 pound turkey?
Fry turkeys that are 10 to 13 pounds for 3 minutes per pound, and for turkeys from 14 to 20 pounds, cook for 3 1/2 minutes per pound. A 10-pound turkey will take about 30 minutes. A 20-pound turkey will require about 1 hour, 10 minutes. Cook until the internal temperature reaches between 180 and 190 degrees Fahrenheit.
How much oil do I need to fry a 15 pound turkey?
If you are thinking of deep-frying a turkey, you may be wondering how much oil to use. Luckily, we’ve got the answer! For small turkeys around 9 pounds, use 3-4 gallons of oil. For medium size turkeys around 12-14 pounds, use 4-5 gallons of oil.
What oil has the highest smoking point?
Type of fat: Oils high in polyunsaturated fats, such as sunflower, flaxseed, or safflower, tend to have a lower smoke point. Oils higher in monounsaturated fats (including avocado, canola, and olive) have medium smoke points. Oils high in saturated fats, such as coconut and palm oils, have higher smoke points.
Can I mix peanut oil and vegetable oil to fry a turkey?
While it’s generally safe to mix peanut oil and vegetable oil, keep in mind that you will have to follow the lower smoke point of the oils.
What oil do restaurants use for frying?
Most deep fryers operate at a temperature between 350- and 400-degrees Fahrenheit, making canola oil a highly stable choice. Furthermore, canola oil tends to be one of the most affordable oils on the market, making it a popular choice for restaurants that require large volumes of oil and frequent oil changes.
Can I reuse deep frying oil?
Some people shy away from deep frying since it seems like a waste to throw out oil after one batch. The good news is that it’s fine to reuse frying oil multiple times when it’s strained—up to a point.
What oil do fast food restaurants use?
Soybean oil is the most abundant of the three vegetable oils that the fast-food restaurants have switched to. It is a joint product of soybeans, which are primarily used for meal and oil. One-third of its value is oil.
How long can you keep used frying oil?
If there is even a hint of rancidity or anything “off,” it’s time to toss it out. Regardless of the amount of care you’re putting in here, you shouldn’t use oil that’s more than 1-2 months old.
Is deep frying unhealthy?
Deep frying adds calories
Even if you use healthy oil, deep frying will add a lot of calories to food, so it’s best not to eat it too often. The extra calories typically come from coatings, including batter and flour, plus the oil that sticks to the food after cooking.
How much oil do you need to deep fry?
You’ll need at least 3 inches (4 to 6 cups) of oil to deep fry most items, so your pan should be able to accommodate that much oil and have plenty of room for the food you will add without spilling over.
How can you tell when oil is 350 degrees?
So here’s a simple technique to help determine when frying oil is at its optimum temperature. Drop a 1″ cube of bread into the hot oil and time how long it takes to turn golden brown. If the bread toasts in 50–60 seconds, the oil is between 350° and 365°—this is the ideal range for most frying jobs.
Can you add cold cooking oil to hot oil?
When you add cold food to hot oil, it will cause the temperature to drop, so you need to compensate by increasing the heat. Using a thermometer is the only way to make sure you’re keeping it constant.
Can I use my meat thermometer for oil?
However, many digital instant-read meat thermometers are designed to be used in various cooking temperatures, including very high heat, such as with hot cooking oil. So yes, they can indeed be used during deep frying to ensure the proper cooking temperatures.